User Guide of Anikeep iOS System Recovery (iOS System Recovery)

Pre-install iTunes, simply launch Anikeep iOS System Recovery on your desktop and get the iOS device plugged into computer via a USB cable. In the program's main interface, choose "iOS System Repair" and then "Start".

You can now select "Standard Reapir" mode (no data loss). If your connected device is detected without problem, you will be directly led to next step. However, if the device cannot be detected, you will have to boot it into Recovery Mode or DFU Mode. Simply follow on-screen instruction and continue.

Note: In the main interface, Anikeep iOS System Recovery allows you to free put iOS device into Recovery Mode with only one click.

Anikeep iOS System Recovery shows your device information by default. Confirm it carefully and if you have different available options, choose your desired iOS version. Then click on the "Download" button to start downloading and verifying a compatible firmware package. Wait patiently until the whole process finishes.

You can begin to repair iOS system with a simple click on the "Start Standard Repair" button. Anikeep iOS System Recovery will instantly help unzip the firmware and fix the iOS for you. Keep in mind to connect the iOS device during the entire repairing process. After that, please get down to checking whether the device can boot normally. There is no data loss.

Get Anikeep iOS System Recovery started on your computer and then connect your iPhone, iPad or iPod for device detection. In the main interface, go for "iOS System Repair" section and simply click on the "Start" button.

Select "Deep Repair" mode to fix serious issue that's related to system software. If your device has been detected and recognized successfully by this program, you will be taken to the next step quickly. If not, you will be required to put your device into DFU Mode or Recovery Mode by following the on-screen instruction.

Anikeep iOS System Recovery will display device model and available iOS version(s) for you to check and choose. Afterward, you can click on "Download" button to download a matched firmware package and complete the verification process.

It's time to initiate a repairing process by clicking on "Start Deep Repair". This program will unzip the downloaded firmware package and fix the iOS. Remember to keep your device connected all the time. Once it's restarted normally, you can set the device and restore data from your iTunes/iCloud backup.

Run Anikeep iOS System Recovery and connect your device to the computer using a USB cable. Head to "Enter/Exit Recovery Mode". Once it's detected, this program will show your device name and device state. Simply click on "Enter Recovery Mode", then you'll see a message showing "Entering recovery mode, please wait...". Keep your device connected all the time. Once a pop-up window displays "Enter recovery mode successfully", the screen of your device will show the 'connect to iTunes or Computer' logo.

Simply open the program of Anikeep iOS System Recovery on your desktop and connect your iOS device. Go to "Enter/Exit Recovery Mode" section in the main interface and pick up "Exit Recovery Mode". Wait a while until the exiting process comes to end. Your device will be rebooted in normal state and you can type in screen passcode if you have set it.

This mode can restore iPhone/iPad/iPod to the default settings without data loss. Simply open Anikeep iOS System Recovery, go for "Reset Device" and choose "Standard Reset". You can follow the on-screen steps: click "General" under device Settings → "Transfer or Reset iPhone" → "Reset". Choose the reset option as you want.

This mode restores your device to factory settings and erases all data. You can click "Reset Device" → "Factory Reset" → "Download" to download a compatible firmware package. After that, click "Start Factory Reset" and wait for the completion. Make sure your device is connected to computer all the time.

Download, install and run the latest version of Anikeep iOS System Recovery on your computer. Then connect your iPhone/iPad/iPod and go ahead to "Upgrade/Downgrade iOS" section in the main interface.

According to your situation, select "iOS upgrade" (or "iOS downgrade"). This program will show available iOS version for you. If there are multiple options, you can choose one that you want. Then click on "Download" button to download and verify a firmware package.

Having successfully downloaded firmware package, you can now click on "Start Upgrade" (or "Start Downgrade") to upgrade (or downgrade) your iOS version. Ensure that your iOS device is fully changed and connected to your computer until the whole process overs.